Submersible Pumps |
We are specialized suppliers that focus specifically on Submersible Pumps and Pumping Solutions in UAE. We have a wide range of pump types, including submersible sewage, drainage and bore well along with knowledgeable staff who can help you choose the right pump for your needs.
Waste Water Lifting Pumps
In cast iron and stainless steel, the submersible drainage pumps ensure high performance and versatility of use. They are used for emptying wells, garages, cellars, rooms subject to flooding, drainage of sub-level areas. Suitable for pumping clear water and rainwater in residential, civil or industrial environments.
Flow Rate: Up to 84 m³/h
Total Head: Up to 43 m
Maximum Solids Passage: 8 mm
Max. temperature of the liquid: +40°C
Insulation class: F
Protection degree: IP68
Voltage: Three-phase 3~380-415±10%
Pump body : Cast iron
Impeller: Cast iron
Flow Rate: Up to 84 m³/h
Total Head: Up to 43 m
Maximum Solids Passage: 8 mm
Max. temperature of the liquid: +40°C
Insulation class: F
Protection degree: IP68
Voltage: Three-phase 3~380-415±10%
Pump body : Cast iron
Impeller: Cast iron
Waste Water Lifting Pumps (Sewage)
Cast iron submersible pump with open double-channel impeller and semi-open anti-clogging impeller, designed to prevent the pump from clogging, to offer maximum efficiency.
DL electric pumps offer a wide range of powers up to 45 kW and different discharge diameters.
Flow Rate: Up to 780 m³/h
Total Head: Up to 43.5 m
Maximum Solids Passage: 8 mm
Max. temperature of the liquid: +40°C
Insulation class: F
Protection degree: IP68
Voltage: Three-phase 3~380-415±10%
Pump body : Cast iron
Impeller: Cast iron
DL electric pumps offer a wide range of powers up to 45 kW and different discharge diameters.
Flow Rate: Up to 780 m³/h
Total Head: Up to 43.5 m
Maximum Solids Passage: 8 mm
Max. temperature of the liquid: +40°C
Insulation class: F
Protection degree: IP68
Voltage: Three-phase 3~380-415±10%
Pump body : Cast iron
Impeller: Cast iron
Borehole Pumps
The 4″ -12″ submersible borehole pump range is available in AISI 304, AISI 316 and duplex stainless steel for long service life. The hydraulics are designed for high sand handling capability. The pumps are used in water supply, irrigation, desalination and deep well dewatering applications.
6”, 7", 8” and 10" submersible pumps, made entirely of AISI 304 (AISI 316 version available upon request). Their full stainless steel structure makes them extremely resistant to corrosion.
The SS range has an original design guaranteeing greater efficiency, better results and reduced consumption, lengthening the lifespan of the device. The configuration between the hydraulic part and the motor is highly flexible, ensuring the maximum adaptability to meet every type of need.
The 6" version stands out for its innovative "tandem pump" solution that offers a higher pressure level without increasing the diameter, so it's ideal in restricted spaces.
Flow Rate: Up to 290 m³/h
Total Head: Up to 700 m
Max. temperature of the liquid: 0°C ÷ 50°C
Insulation class: F
Protection degree: IP68
Voltage: Three-phase 3~380-415±10%
Discharge Casing : Stainless steel AISI 304L
Impeller: Stainless steel AISI 304L
Shaft: Stainless steel AISI 431
6”, 7", 8” and 10" submersible pumps, made entirely of AISI 304 (AISI 316 version available upon request). Their full stainless steel structure makes them extremely resistant to corrosion.
The SS range has an original design guaranteeing greater efficiency, better results and reduced consumption, lengthening the lifespan of the device. The configuration between the hydraulic part and the motor is highly flexible, ensuring the maximum adaptability to meet every type of need.
The 6" version stands out for its innovative "tandem pump" solution that offers a higher pressure level without increasing the diameter, so it's ideal in restricted spaces.
Flow Rate: Up to 290 m³/h
Total Head: Up to 700 m
Max. temperature of the liquid: 0°C ÷ 50°C
Insulation class: F
Protection degree: IP68
Voltage: Three-phase 3~380-415±10%
Discharge Casing : Stainless steel AISI 304L
Impeller: Stainless steel AISI 304L
Shaft: Stainless steel AISI 431
Submersible Electric Motors
Submersible motors available in several versions: with rewindable or encapsulated options, Oil or water bath lubrication (rewindable with both oil and water bath lubrication, or encapsulated with water bath lubrication), single-phase and three-phase. They all comply with the NEMA standards and can be combined with 3”, 4”, 6”, 7", 8” and 10" pumps.
Single-phase and three-phase submersible motors, suitable for coupling with 3”, 4”, 6”, 7", 8” and 10" pumps and available in various combinations. There's a wide choice of submersible motors: from rewindable versions with oil bath lubrication, to encapsulated motors with water bath lubrication.
Max. temperature of the liquid: +40°C
Insulation class: F
Protection degree: IP68
Voltage: Single-phase 1~230V,
: Three-phase 3~400V
: Three-phase 3~380-415V (±10%)
Maximum Immersion: 350 m with motor in water bath
: 150 m with motor in oil bath
Max. Sand Content: 100 gr/m³
Single-phase and three-phase submersible motors, suitable for coupling with 3”, 4”, 6”, 7", 8” and 10" pumps and available in various combinations. There's a wide choice of submersible motors: from rewindable versions with oil bath lubrication, to encapsulated motors with water bath lubrication.
Max. temperature of the liquid: +40°C
Insulation class: F
Protection degree: IP68
Voltage: Single-phase 1~230V,
: Three-phase 3~400V
: Three-phase 3~380-415V (±10%)
Maximum Immersion: 350 m with motor in water bath
: 150 m with motor in oil bath
Max. Sand Content: 100 gr/m³